创建博客 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

于敏的记忆

记录有用的东西(结构、建筑、软件、论文、考试、生活常识)

 
 
 

日志

 
 

ABAQUS命令汇总及参数的默认设置(ABAQUS Command Summary and Command line default parameters)  

2011-02-13 20:33:50|  分类: ABAQUS |  标签: |举报 |字号 订阅

Command summary
ABAQUS命令汇总(ABAQUS Command Summary)及参数的默认设置(Command line default parameters) - 于敏 - 于敏的记忆

abaqus
job=job-name
  [analysis | datacheck | parametercheck | continue | convert={select | odb | state | all} | recover | syntaxcheck | information={environment | local | memory | release | support | system | all}]
[input=input-file]
[user={source-file | object-file}]
[oldjob=oldjob-name]
[fil={append | new}]
[globalmodel={results file-name | output database file-name}]
[cpus=number-of-cpus]
[parallel={domain | loop}]
[domains=number-of-domains]
[mp_mode={mpi | threads}]
[standard_parallel={all | solver}]
[memory=memory-size]
[interactive |  background | queue=[queue-name][after=time]]
[double={explicit | both}]
[scratch=scratch-dir]
[output_precision={single | full} ]
[madymo=MADYMO-input-file]
[port=co-simulation port-number]
[host=co-simulation hostname]
[timeout=co-simulation timeout value in seconds]
[unconnected_regions={yes | no}]

Command line default parameters
ABAQUS命令汇总(ABAQUS Command Summary)及参数的默认设置(Command line default parameters) - 于敏 - 于敏的记忆

The following parameters provide default values for various settings that would otherwise have to be specified on the command line (see Execution procedure for Abaqus/Standard and Abaqus/Explicit,Section 3.2.2). Values given on the command line override values specified in the environment files.

cpus

Number of processors to use if parallel processing is available. The default is 1.

domains

The number of parallel domains in Abaqus/Explicit. If the value is greater than 1, the domain decomposition will be performed regardless of the values of the parallel and cpus parameters. However, if parallel=domain, the value of cpus must be evenly divisible into the value of domains. If this parameter is not set, the number of domains defaults to the number of processors used during the analysis run if parallel=domain or to 1 if parallel=loop.

double_precision

The default precision version of Abaqus/Explicit to run if you do not specify the precision version on the abaqus command line. Possible values are EXPLICIT (only the Abaqus/Explicit analysis is run in double precision) or BOTH (both the Abaqus/Explicit packager and analysis are run in double precision). The default is EXPLICIT.

parallel

The default parallel method in Abaqus/Explicit if you do not specify the parallel method on the abaqus command line. Possible values are DOMAIN or LOOP; the default value is DOMAIN.

run_mode

Default run mode (interactive, background, or batch) if you do not specify the run mode on the abaqus command line. The default for abaqus analysis is "background", while the default for abaqus viewer is "interactive".

scratch

Directory to be used for scratch files. This directory must exist (i.e., it will not be created by Abaqus) and must have write permission assigned. On UNIX platforms the default value is the value of the $TMPDIR environment variable or /tmp if $TMPDIR is not defined. On Windows platforms the default value is the value of the %TEMP% environment variable or \TEMP if this variable is not defined. During the analysis a subdirectory will be created under this directory to hold the analysis scratch files. The name of the subdirectory is constructed from your user name, the job id, and the job's process identifier. The subdirectory and its contents are deleted upon completion of the analysis.

standard_parallel

The default parallel execution mode in Abaqus/Standard if you do not specify the parallel mode on the abaqus command line. If this parameter is set equal to ALL, both the element operations and the solver will run in parallel. If this parameter is set equal to SOLVER, only the solver will run in parallel. The default parallel execution mode is ALL.

unconnected_regions

If this variable is set to ON, Abaqus/Standard will create element and node sets in the output database for unconnected regions in the model during a datacheck analysis. Element and node sets created with this option are named MESH COMPONENT N, where N is the component number. The default value is OFF.

System resource parameters
ABAQUS命令汇总(ABAQUS Command Summary)及参数的默认设置(Command line default parameters) - 于敏 - 于敏的记忆

The following environment file variable can be set after the code has been installed to change the resources used by Abaqus and, therefore, to improve system performance. By default, Abaqus detects the physical memory on a machine (or on each compute node in a cluster) and allocates a percentage of the available memory based on the machine platform (for details, refer to the SIMULIA Online Support System, which is accessible from the My Support page at www.simulia.com). You can override the default percentage by specifying a number followed by the percentage sign. The variable can also be defined as the number of megabytes or the number of gigabytes. More detailed information about changing the system resources used by Abaqus is given in Managing memory and disk use in Abaqus,Section 3.4.1.

memory

Maximum amount of memory or maximum percentage of the physical memory that can be allocated during the input file preprocessing and during the Abaqus/Standard analysis phase. For parallel execution on computer clusters, this memory limit specifies the maximum amount of memory that can be allocated on each process.

System customization parameters
ABAQUS命令汇总(ABAQUS Command Summary)及参数的默认设置(Command line default parameters) - 于敏 - 于敏的记忆

The following is a discussion of some additional environment file parameters that are commonly used. A complete listing of parameters can be found in the Abaqus Installation and Licensing Guide.

ask_delete

If this parameter is set equal to OFF, you will not be asked whether old job files of the same file name should be deleted; the files will be deleted automatically. The default value is ON.

auto_calculate

If this parameter is set equal to ON, the postprocessing calculator will be launched automatically at the end of an analysis if the execution procedure detects that output database file conversion is necessary. If this parameter is set to OFF, the postprocessing calculator will not run at the end of an analysis even if the execution procedure detects that it is necessary. The default value is ON.

auto_convert

If this parameter is set equal to ON and an Abaqus/Explicit analysis is run in parallel with parallel=domain, the convert=select, convert=state, and convert=odb options will be run automatically at the end of the analysis. The default value is ON.

average_by_section

This parameter is used only for an Abaqus/Standard analysis. If this parameter is set equal to OFF, the averaging regions for output written to the data (.dat) file and results (.fil) file are based on the structure of the elements. If this parameter is set equal to ON, the averaging regions also take into account underlying values of element properties and material constants. In problems with many section and/or material definitions the default value of OFF will, in general, give much better performance than the nondefault value of ON. See Output to the data and results files,Section 4.1.2, for further details on the averaging scheme.

mp_host_list

List of host machine names to be used for an MPI-based parallel Abaqus analysis, including the number of processors to be used on each machine; for example,

mp_host_list=[['maple',1],['pine',1],['oak',2]]
indicates that, if the number of cpus specified for the analysis is 4, the analysis will use one processor on a machine called maple, one processor on a machine called pine, and two processors on a machine called oak. The total number of processors defined in the host list has to be greater than or equal to the number of cpus specified for the analysis. If the host list is not defined, Abaqus will run on the local system. When using a supported queuing system, this parameter does not need to be defined. If it is defined, it will get overridden by the queuing environment.

mp_mode

Set this variable equal to MPI to indicate that the MPI components are available on the system. Set mp_mode=THREADS to use the thread-based parallelization method. The default value is MPI where applicable.

odb_output_by_default

If this parameter is set equal to ON, output database output will be generated automatically. If this parameter is set equal to OFF, output database request keywords must be placed in an input file to obtain output database output. The default value is ON.

onCaeStartup

Optional function to be executed before Abaqus/CAE begins. See Customizing Abaqus/CAE startup,Section 4.3.3 of the Abaqus Installation and Licensing Guide, for examples of this function.

Co-simulation parameters
ABAQUS命令汇总(ABAQUS Command Summary)及参数的默认设置(Command line default parameters) - 于敏 - 于敏的记忆

The following environment file variables provide default settings for co-simulation between two Abaqus analyses or between Abaqus and AcuSolve.

cosimulation_port

Set cosimulation_port equal to the port number used for the connection. The default value is 48000.

cosimulation_timeout

Set cosimulation_timeout equal to the timeout period in seconds. Abaqus terminates if it does not receive any communication from the coupled analysis program during the time specified. The default value is 3600 seconds.

  评论这张
 
阅读(2749)| 评论(2)
推荐 转载

历史上的今天

最近读者

热度

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2014